Center of Excellence & Innovation
in Instrumentation,
Analysis & Computation
in Instrumentation,
Analysis & Computation
- 28/06/2022
PORTRAIT #3 – Rémi SALANON, Project Manager... - 30/05/2022
PORTRAIT #2 – Murielle DJENDO SCHMAUTZ, Accountan... - 20/05/2022
H2020 ECO DRIVE Public Industrial Workshop... - 11/04/2022
PORTRAIT #1 – Gérald Monchalin, MicroDB Producti... - 25/02/2022
Our training now QUALIOPI certified!... - 24/01/2022
There are still openings for our Experimental Modal Ana... - 22/11/2021
Gas Turbine Compressor / Generator package Integration... - 19/11/2021
Axial Flux Machine NVH Webinar... - 13/09/2021
Railway R&D: VibraTec develops new methods to spee... - 02/08/2021
Proud to contribute to a sustainable, fuel-efficient, l... - 26/07/2021
Back to school soon – for everyone!... - 17/05/2021
E-Silence: reducing e-powertrain NVH behavior without d... - 03/05/2021
June training sessions: a great occasion to complete yo... - 27/04/2021
A new Turnkey test center for electrified vehicles... - 08/04/2021
The SILVARSTAR website is on line !... - 30/03/2021
Innovative Solutions to Address the Future Zero-emissio... - 16/03/2021
Webinar: Reciprocating Pump Vibrations & Pulsation ... - 23/02/2021
Train with VibraTec – because sharing and transmi... - 02/02/2021
Indirect rail acoustic roughness measurements using an ... - 26/01/2021
Even small successes deserve to be celebrated.... - 12/01/2021
VibraTec proud to organize 1st LIVE-I public event in 2... - 08/01/2021
VibraTec – designing pragmatic, innovative solutions... - 18/12/2020
FIV Webinar: all about Flow-Induced Vibration in piping... - 24/11/2020
Registration for our 2021 training programs is open!... - 19/11/2020
VibraTec webinar: Acoustic-Induced Vibration... - 10/11/2020
ATCx Automobile – November 19th 2020 : Acoustics ... - 04/11/2020
“Business as usual” during lockdown... - 08/06/2020
VibraTec offers a technical course in the form of 5 web... - 15/04/2020
FATIGUE is an important criterion in your activities, b... - 01/04/2020
Optimizing E-Powertrain acoustic treatment... - 27/03/2020
NVH performance characterization of MHEV, PHEV and BEV ... - 25/03/2020
E-powertrain design to reach performance and NVH target... - 18/02/2020
Clean Sky’s CANOBLE – New architecture, new... - 13/02/2020
Gain computation time with VibraTec’s digital planeta... - 29/01/2020
Trainee satisfaction in 2019... - 14/01/2020
TRANSIT – Railway noise R&D for cost-effective v... - 21/11/2019
Why wait to schedule your 2020 training programs?... - 14/11/2019
Extend asset service life thanks to VibraTec’s expert... - 07/11/2019
Quality control is of utmost importance to industrialis... - 11/10/2019
Converting data into information to improve structural ... - 11/10/2019
MHEV, PHEV and BEV vehicle benchmarking... - 11/10/2019
Optimization of E-Powertrain acoustic treatment... - 11/10/2019
E-powertrain design to reach performance and NVH target... - 05/09/2019
Experimental validation of numeric planetary gear set b... - 20/08/2019
Acoustic transparency of Alberich coatings under high w... - 25/06/2019
Bearing and gear fault detection using Machine Learning... - 17/06/2019
Annual Meeting : French Mechanics Association Rotating ... - 13/06/2019
Railway monitoring: Autonomous Embedded Vibroacoustic... - 11/06/2019
XIX International Wheelset Congress: “IWC” in Venic... - 29/05/2019
International Congress: “SIA POWER TRAIN & ELECTR... - 21/05/2019
European Test and Telemetry Conference (ETTC 2019)... - 09/05/2019
25th AIAA/CEAS Aeroacoustics Conference, 20-23 May 2019... - 02/05/2019
Vehicle Symposium EVS32 « A world of E MOTION » in Ly... - 19/03/2019
There are no passengers on spaceship earth.... - 26/02/2019
Acoustic Optimization of E-Machines... - 19/02/2019
VIBRATEC is now proposing a maintenance aid service for... - 11/12/2018
ShareLab – invite yourself to VibraTec !... - 19/11/2018
IAViC – Kuala Lumpur, Nov 21st and 22nd, 2018... - 13/11/2018
Rail Safety Seminar – Singapore, Nov 19th, 2018... - 05/11/2018
Jessica Neufond will represent VibraTec in Le Mans on 1... - 08/10/2018
SIA CTTM Automotive NVH congress – Le Mans, October 1... - 01/10/2018
Automotive Noise and Vibration Congress India 9-10 Octo... - 24/09/2018
Hybrid aero/vibro-acoustics modeling to deal with turbu... - 11/09/2018
CM 2018 in Delft, Netherlands: Rail joint dynamic force... - 31/08/2018
September 2018 International Railway Conference : ̵... - 23/08/2018
Dealing with gear noise of real industrial systems: an ... - 31/07/2018
VibraTec – European partner for tomorrow’s cities... - 17/07/2018
Acoustic design of Trains and Tracks... - 28/06/2018
ASME Pressure Vessels and Piping (PVP2018) Conference ... - 15/06/2018
Bayesian focalisation applied to wind tunnels – AIAA/... - 13/06/2018
ISNVH Congress in Graz Austria: June 20th – 22nd, 201... - 29/05/2018
Customized asset management and monitoring solutions: l... - 21/05/2018
2018 Vibratec China Activities... - 09/05/2018
VibraTec at the ENOVA Toulouse event on the 30th and 31... - 02/05/2018
Vibratec awarded by the CLEANSKY 2 to develop an instru... - 27/04/2018
LUG2 project at NOVEM 2018... - 17/04/2018
Ignorance is bliss ?... - 06/04/2018
Come and meet VibraTec at TRA 2018... - 20/03/2018
Comprehensive innovative monitoring solutions to be pre... - 14/03/2018
VibraTec very first railway seminar in Malaysia !... - 13/03/2018
Innovate with VibraTec ! We will be at the Smart Indust... - 06/03/2018
MicrodB and Siemens Industry Software will present a pa... - 01/03/2018
The JASA (Journal of the Acoustical Society of America)... - 22/02/2018
Non-intrusive pipe pressure measurements – a dream co... - 13/02/2018
MicrodB will be at the 7th Berlin Beamforming conferenc... - 22/01/2018
Small company or multinational ? Come talk to VibraTec ... - 20/12/2017
The VibraTec Group – actively involved in training to... - 28/11/2017
VibraTec – preparing students for the real world... - 15/11/2017
Fatigue Design 2017: Innovative numerical fatigue metho... - 26/10/2017
At VibraTec, working together means having each other... - 10/10/2017
VibraTec participates at JAAN on the 26th and 27th of O... - 05/10/2017
AIV – FIV: VibraTec’s your one-stop piping expert !... - 20/09/2017
VibraTec E-Noise Training in Shanghai China... - 18/09/2017
Why wait to schedule your 2018 training programs ?... - 07/09/2017
VibraTec will be at SERMA’s Technology Days on Septem... - 22/08/2017
Presentation of two publications at the VDI – Int... - 08/08/2017
VibraTec’s R&D is in the pipeline !... - 18/07/2017
VibraTec’s training programs referenced by DataDo... - 13/07/2017
Dynamic and vibroacoustic behavior of planetary gear tr... - 04/07/2017
VibraTec – tackling railway measurement & simulat... - 29/06/2017
Presentation of a publication at the ATZ Automotive Aco... - 20/06/2017
Using Particle Image Velocimetry to address piping FIV ... - 15/06/2017
We will be at the 8th VDI conference on wind turbine vi... - 07/06/2017
Controlling joints to improve railway infrastructure re... - 01/06/2017
Dynamic response: a pertinent indication of structural ... - 24/05/2017
The Global Innovative Automotive Acoustics (NVH) summit... - 12/05/2017
Presentation of a publication at Surveillance 9 Confere... - 03/05/2017
VibraTec Asia Pacific to be part of Rail Solutions Asia... - 18/04/2017
VIBRATEC among top NVH Specialists at the ChongQing Aut... - 04/04/2017
COnnected MAintenance using VIbration measurements... - 10/01/2017
We will be at SIAT India on Jan 21st... - 02/11/2016
MicrodB to present R&D work at the Aachen Acoustic... - 27/10/2016
VibraTec joins the CleanSky program with CANOBLE for in...
Vibratec’s team of industry experts are dedicated to our clients’ project and operational needs
With more than 100 highly-motivated experts, including – PhDs, engineers and specialized technicians , Vibratec is able to identify, explain and rectify dynamic phenomena present in all types of facilities and equipment. To meet the needs of our clients, our engineers:
- Work on-site throughout the world, where and when they are needed
- Adapt to technical standards and requirements as needed
- Combine simulation, measurement and testing methods using software and measurement tools best adapted to the technical requirements of the project
- Are involved in R&D programs in order to remain on the cutting edge of their scientific and technological fields
- Utilise the knowledge and experience of the whole company, as gained from our experience in all industrial sectors. This approach ensures that our clients will always receive the best possible service
Our experts
|
Technicians - we are recruiting ! |