AUTOMOTIVE
- 28/06/2022
PORTRAIT #3 – Rémi SALANON, Project Manager - 30/05/2022
PORTRAIT #2 – Murielle DJENDO SCHMAUTZ, Accountant - 20/05/2022
H2020 ECO DRIVE Public Industrial Workshop - 11/04/2022
PORTRAIT #1 – Gérald Monchalin, MicroDB Production Manager - 25/02/2022
Our training now QUALIOPI certified! - 24/01/2022
There are still openings for our Experimental Modal Analysis training on March 10 & 11 in Ecully (Lyon) - 22/11/2021
Gas Turbine Compressor / Generator package Integration - 13/09/2021
Railway R&D: VibraTec develops new methods to speed up acoustic certification - 02/08/2021
Proud to contribute to a sustainable, fuel-efficient, low-noise, 100% European aircraft engine - 26/07/2021
Back to school soon – for everyone! - 17/05/2021
E-Silence: reducing e-powertrain NVH behavior without deteriorating performance or increasing cost - 03/05/2021
June training sessions: a great occasion to complete your skillset - 27/04/2021
A new Turnkey test center for electrified vehicles - 08/04/2021
The SILVARSTAR website is on line ! - 30/03/2021
Innovative Solutions to Address the Future Zero-emissions Aircraft - 16/03/2021
Webinar: Reciprocating Pump Vibrations & Pulsation Analysis - 23/02/2021
Train with VibraTec – because sharing and transmission are part of our DNA. - 02/02/2021
Indirect rail acoustic roughness measurements using an onboard system - 26/01/2021
Even small successes deserve to be celebrated. - 12/01/2021
VibraTec proud to organize 1st LIVE-I public event in 2021 - 08/01/2021
VibraTec – designing pragmatic, innovative solutions - 24/11/2020
Registration for our 2021 training programs is open! - 10/11/2020
ATCx Automobile – November 19th 2020 : Acoustics of electric traction drives: from multiphysical simulation to multicriteria optimization - 04/11/2020
“Business as usual” during lockdown - 08/06/2020
VibraTec offers a technical course in the form of 5 webinars on electric motor + gearbox sub-assemblies (E-powertrain, electric actuators, gear drives, etc) (given in French with English presentations). - 01/04/2020
Optimizing E-Powertrain acoustic treatment - 27/03/2020
NVH performance characterization of MHEV, PHEV and BEV cars - 25/03/2020
E-powertrain design to reach performance and NVH targets - 29/01/2020
Trainee satisfaction in 2019 - 21/11/2019
Why wait to schedule your 2020 training programs? - 14/11/2019
Extend asset service life thanks to VibraTec’s expertise in fatigue analysis and approach to evaluate remaining life - 07/11/2019
Quality control is of utmost importance to industrialists - 11/10/2019
Converting data into information to improve structural diagnosis - 11/10/2019
MHEV, PHEV and BEV vehicle benchmarking - 11/10/2019
Optimization of E-Powertrain acoustic treatment - 11/10/2019
E-powertrain design to reach performance and NVH targets - 05/09/2019
Experimental validation of numeric planetary gear set behavior - 25/06/2019
Bearing and gear fault detection using Machine Learning - 29/05/2019
International Congress: “SIA POWER TRAIN & ELECTRONICS” in Port Marly (Paris), 11 -13th June, 2019 - 02/05/2019
Vehicle Symposium EVS32 « A world of E MOTION » in Lyon (France), May 19 – 22nd, 2019 - 19/03/2019
There are no passengers on spaceship earth. - 26/02/2019
Acoustic Optimization of E-Machines - 05/11/2018
Jessica Neufond will represent VibraTec in Le Mans on 15-16 Nov at the Young Researchers’ Days in vibrations, Acoustics and Noise - 08/10/2018
SIA CTTM Automotive NVH congress – Le Mans, October 17th & 18th, 2018 - 01/10/2018
Automotive Noise and Vibration Congress India 9-10 October 2018 - 24/09/2018
Hybrid aero/vibro-acoustics modeling to deal with turbulent boundary layer noise & vibration - 11/09/2018
CM 2018 in Delft, Netherlands: Rail joint dynamic forces computations, including rail plasticity - 23/08/2018
Dealing with gear noise of real industrial systems: an overview of the difficulties and the achievements - 31/07/2018
VibraTec – European partner for tomorrow’s cities - 15/06/2018
Bayesian focalisation applied to wind tunnels – AIAA/CEAS conference Atlanta - 13/06/2018
ISNVH Congress in Graz Austria: June 20th – 22nd, 2018 - 21/05/2018
2018 Vibratec China Activities - 27/04/2018
LUG2 project at NOVEM 2018 - 06/04/2018
Come and meet VibraTec at TRA 2018 - 06/03/2018
MicrodB and Siemens Industry Software will present a paper at DAGA2018 - 20/09/2017
VibraTec E-Noise Training in Shanghai China - 18/09/2017
Why wait to schedule your 2018 training programs ? - 22/08/2017
Presentation of two publications at the VDI – International Conference on Gears in Munich, Germany, September 14th, 2017 - 18/07/2017
VibraTec’s training programs referenced by DataDock - 13/07/2017
Dynamic and vibroacoustic behavior of planetary gear trains – VibraTec is on the job - 29/06/2017
Presentation of a publication at the ATZ Automotive Acoustics Conference in Zurich, Switzerland, July 11th, 2017 - 24/05/2017
The Global Innovative Automotive Acoustics (NVH) summit will take place in Berlin, June 13-14, 2017. - 18/04/2017
VIBRATEC among top NVH Specialists at the ChongQing Automotive Acoustic Summit on 27-28 April - 10/01/2017
We will be at SIAT India on Jan 21st - 02/11/2016
MicrodB to present R&D work at the Aachen Acoustics Colloquium later this month
VibraTec’s automotive Department serves the automotive industries: OEM’s and suppliers, truck & bus and two-wheel vehicle manufacturers.
Our vision is to provide our clients with flexible and appropriate ‘best-in-class’ engineering services for acoustics, vibration and durability. Our mission is to deliver results and custom-made solutions that give our clients both value and competitive advantage.
VibraTec’s expertise is based on 30 years of collaboration with major OEMs and covers test and simulation of mechanical structures using up-to-date experimental tools and software.
Presentation
|
Technicians - we are recruiting ! |