AUTOMOTIVE
- 28/06/2022
PORTRAIT #3 – Rémi SALANON, Project Manager - 30/05/2022
PORTRAIT #2 – Murielle DJENDO SCHMAUTZ, Accountant - 20/05/2022
H2020 ECO DRIVE Public Industrial Workshop - 11/04/2022
PORTRAIT #1 – Gérald Monchalin, MicroDB Production Manager - 25/02/2022
Our training now QUALIOPI certified! - 24/01/2022
There are still openings for our Experimental Modal Analysis training on March 10 & 11 in Ecully (Lyon) - 22/11/2021
Gas Turbine Compressor / Generator package Integration - 13/09/2021
Railway R&D: VibraTec develops new methods to speed up acoustic certification - 02/08/2021
Proud to contribute to a sustainable, fuel-efficient, low-noise, 100% European aircraft engine - 26/07/2021
Back to school soon – for everyone! - 17/05/2021
E-Silence: reducing e-powertrain NVH behavior without deteriorating performance or increasing cost - 03/05/2021
June training sessions: a great occasion to complete your skillset - 27/04/2021
A new Turnkey test center for electrified vehicles - 08/04/2021
The SILVARSTAR website is on line ! - 30/03/2021
Innovative Solutions to Address the Future Zero-emissions Aircraft - 16/03/2021
Webinar: Reciprocating Pump Vibrations & Pulsation Analysis - 23/02/2021
Train with VibraTec – because sharing and transmission are part of our DNA. - 02/02/2021
Indirect rail acoustic roughness measurements using an onboard system - 26/01/2021
Even small successes deserve to be celebrated. - 12/01/2021
VibraTec proud to organize 1st LIVE-I public event in 2021 - 08/01/2021
VibraTec – designing pragmatic, innovative solutions - 24/11/2020
Registration for our 2021 training programs is open! - 10/11/2020
ATCx Automobile – November 19th 2020 : Acoustics of electric traction drives: from multiphysical simulation to multicriteria optimization - 04/11/2020
“Business as usual” during lockdown - 08/06/2020
VibraTec offers a technical course in the form of 5 webinars on electric motor + gearbox sub-assemblies (E-powertrain, electric actuators, gear drives, etc) (given in French with English presentations). - 01/04/2020
Optimizing E-Powertrain acoustic treatment - 27/03/2020
NVH performance characterization of MHEV, PHEV and BEV cars - 25/03/2020
E-powertrain design to reach performance and NVH targets - 29/01/2020
Trainee satisfaction in 2019 - 21/11/2019
Why wait to schedule your 2020 training programs? - 14/11/2019
Extend asset service life thanks to VibraTec’s expertise in fatigue analysis and approach to evaluate remaining life - 07/11/2019
Quality control is of utmost importance to industrialists - 11/10/2019
Converting data into information to improve structural diagnosis - 11/10/2019
MHEV, PHEV and BEV vehicle benchmarking - 11/10/2019
Optimization of E-Powertrain acoustic treatment - 11/10/2019
E-powertrain design to reach performance and NVH targets - 05/09/2019
Experimental validation of numeric planetary gear set behavior - 25/06/2019
Bearing and gear fault detection using Machine Learning - 29/05/2019
International Congress: “SIA POWER TRAIN & ELECTRONICS” in Port Marly (Paris), 11 -13th June, 2019 - 02/05/2019
Vehicle Symposium EVS32 « A world of E MOTION » in Lyon (France), May 19 – 22nd, 2019 - 19/03/2019
There are no passengers on spaceship earth. - 26/02/2019
Acoustic Optimization of E-Machines - 05/11/2018
Jessica Neufond will represent VibraTec in Le Mans on 15-16 Nov at the Young Researchers’ Days in vibrations, Acoustics and Noise - 08/10/2018
SIA CTTM Automotive NVH congress – Le Mans, October 17th & 18th, 2018 - 01/10/2018
Automotive Noise and Vibration Congress India 9-10 October 2018 - 24/09/2018
Hybrid aero/vibro-acoustics modeling to deal with turbulent boundary layer noise & vibration - 11/09/2018
CM 2018 in Delft, Netherlands: Rail joint dynamic forces computations, including rail plasticity - 23/08/2018
Dealing with gear noise of real industrial systems: an overview of the difficulties and the achievements - 31/07/2018
VibraTec – European partner for tomorrow’s cities - 15/06/2018
Bayesian focalisation applied to wind tunnels – AIAA/CEAS conference Atlanta - 13/06/2018
ISNVH Congress in Graz Austria: June 20th – 22nd, 2018 - 21/05/2018
2018 Vibratec China Activities - 27/04/2018
LUG2 project at NOVEM 2018 - 06/04/2018
Come and meet VibraTec at TRA 2018 - 06/03/2018
MicrodB and Siemens Industry Software will present a paper at DAGA2018 - 20/09/2017
VibraTec E-Noise Training in Shanghai China - 18/09/2017
Why wait to schedule your 2018 training programs ? - 22/08/2017
Presentation of two publications at the VDI – International Conference on Gears in Munich, Germany, September 14th, 2017 - 18/07/2017
VibraTec’s training programs referenced by DataDock - 13/07/2017
Dynamic and vibroacoustic behavior of planetary gear trains – VibraTec is on the job - 29/06/2017
Presentation of a publication at the ATZ Automotive Acoustics Conference in Zurich, Switzerland, July 11th, 2017 - 24/05/2017
The Global Innovative Automotive Acoustics (NVH) summit will take place in Berlin, June 13-14, 2017. - 18/04/2017
VIBRATEC among top NVH Specialists at the ChongQing Automotive Acoustic Summit on 27-28 April - 10/01/2017
We will be at SIAT India on Jan 21st - 02/11/2016
MicrodB to present R&D work at the Aachen Acoustics Colloquium later this month
