AERONAUTIC AND SPACE
  • 11/09/2018
    CM 2018 in Delft, Netherlands: Rail joint dynamic forces computations, including rail plasticity
  • 31/08/2018
    September 2018 International Railway Conference : ‘Rad-Schiene’ in Dresden
  • 23/08/2018
    Dealing with gear noise of real industrial systems: an overview of the difficulties and the achievements
  • 21/08/2018
    There’s still time to use your 2018 training budgets
  • 14/08/2018
    ShareLab – invite yourself to VibraTec !
  • 07/08/2018
    Improve your skills in our October training sessions
  • 31/07/2018
    VibraTec – European partner for tomorrow’s cities
  • 17/07/2018
    Acoustic design of Trains and Tracks
  • 11/07/2018
    Get your school year off to a good start – with some professional training !
  • 28/06/2018
    ASME Pressure Vessels and Piping (PVP2018) Conference – VibraTec to publish our technical developments
  • 15/06/2018
    Bayesian focalisation applied to wind tunnels – AIAA/CEAS conference Atlanta
  • 13/06/2018
    ISNVH Congress in Graz Austria: June 20th – 22nd, 2018
  • 29/05/2018
    Customized asset management and monitoring solutions: learn about at Achema, from 11th to 15th of June 2018
  • 21/05/2018
    2018 Vibratec China Activities
  • 17/05/2018
    Piping Vibration Training Kuala Lumpur on 16th Jul 2018
  • 09/05/2018
    VibraTec at the ENOVA Toulouse event on the 30th and 31st of May 2018
  • 02/05/2018
    Vibratec awarded by the CLEANSKY 2 to develop an instrumented engine cradle for the turboprop demonstrator ground test with SAFRAN Helicopters Engines
  • 27/04/2018
    LUG2 project at NOVEM 2018
  • 10/04/2018
    Managing MEMs microphone calibration – MicrodB will share its findings at the 14th French Acoustic Congress in Le Havre from April 23rd to 27th.
  • 06/04/2018
    Come and meet VibraTec at TRA 2018
  • 01/03/2018
    The JASA (Journal of the Acoustical Society of America) chooses MicrodB as the latest Technical Area Pick in Signal Processing
  • 13/02/2018
    MicrodB will be at the 7th Berlin Beamforming conference – BeBeC
  • 18/09/2017
    Why wait to schedule your 2018 training programs ?
  • 18/07/2017
    VibraTec’s training programs referenced by DataDock
  • 27/10/2016
    VibraTec joins the CleanSky program with CANOBLE for interior cabin noise, the sky’s the limit !
News

VibraTec has an extensive laboratory and a wide range of measurement tools on site. Subsequently we are able to deliver routine or highly bespoke services to perform measurements and test analysis. Testing can include, but is not limited to:

  • Measurement set-up and instrumentation,
  • Test specification and test bench development,
  • On-site or in-house lab measurements,
  • Report analysis and recommendations,
  • Test result analysis for dynamic model tuning.

VibraTec provides expertise in structural analysis, material characterization, stress testing, mechanical, acoustic and vibration analysis. Our objective is to qualify your design and  to provide recommendations, solutions and modifications as needed.

From the virtual to the real

prototype banc friction
noise turbomachine stator
acoustic rotor mesurement

ShareLab - invite yourself to VibraTec !

VibraTec welcomes you to our lab and gives you free access to our sensors, data acquisition systems and facilities.