- 28/06/2022
PORTRAIT #3 – Rémi SALANON, Project Manager - 30/05/2022
PORTRAIT #2 – Murielle DJENDO SCHMAUTZ, Accountant - 20/05/2022
H2020 ECO DRIVE Public Industrial Workshop - 11/04/2022
PORTRAIT #1 – Gérald Monchalin, MicroDB Production Manager - 25/02/2022
Our training now QUALIOPI certified! - 24/01/2022
There are still openings for our Experimental Modal Analysis training on March 10 & 11 in Ecully (Lyon) - 22/11/2021
Gas Turbine Compressor / Generator package Integration - 13/09/2021
Railway R&D: VibraTec develops new methods to speed up acoustic certification - 02/08/2021
Proud to contribute to a sustainable, fuel-efficient, low-noise, 100% European aircraft engine - 26/07/2021
Back to school soon – for everyone! - 17/05/2021
E-Silence: reducing e-powertrain NVH behavior without deteriorating performance or increasing cost - 03/05/2021
June training sessions: a great occasion to complete your skillset - 27/04/2021
A new Turnkey test center for electrified vehicles - 08/04/2021
The SILVARSTAR website is on line ! - 30/03/2021
Innovative Solutions to Address the Future Zero-emissions Aircraft - 16/03/2021
Webinar: Reciprocating Pump Vibrations & Pulsation Analysis - 23/02/2021
Train with VibraTec – because sharing and transmission are part of our DNA. - 02/02/2021
Indirect rail acoustic roughness measurements using an onboard system - 26/01/2021
Even small successes deserve to be celebrated. - 12/01/2021
VibraTec proud to organize 1st LIVE-I public event in 2021 - 08/01/2021
VibraTec – designing pragmatic, innovative solutions - 24/11/2020
Registration for our 2021 training programs is open! - 04/11/2020
“Business as usual” during lockdown - 18/02/2020
Clean Sky’s CANOBLE – New architecture, new cockpit… new noise experience - 29/01/2020
Trainee satisfaction in 2019 - 21/11/2019
Why wait to schedule your 2020 training programs? - 14/11/2019
Extend asset service life thanks to VibraTec’s expertise in fatigue analysis and approach to evaluate remaining life - 07/11/2019
Quality control is of utmost importance to industrialists - 11/10/2019
Converting data into information to improve structural diagnosis - 11/10/2019
Optimization of E-Powertrain acoustic treatment - 11/10/2019
E-powertrain design to reach performance and NVH targets - 05/09/2019
Experimental validation of numeric planetary gear set behavior - 25/06/2019
Bearing and gear fault detection using Machine Learning - 09/05/2019
25th AIAA/CEAS Aeroacoustics Conference, 20-23 May 2019, Delft, Netherlands - 19/03/2019
There are no passengers on spaceship earth. - 24/09/2018
Hybrid aero/vibro-acoustics modeling to deal with turbulent boundary layer noise & vibration - 11/09/2018
CM 2018 in Delft, Netherlands: Rail joint dynamic forces computations, including rail plasticity - 23/08/2018
Dealing with gear noise of real industrial systems: an overview of the difficulties and the achievements - 15/06/2018
Bayesian focalisation applied to wind tunnels – AIAA/CEAS conference Atlanta - 02/05/2018
Vibratec awarded by the CLEANSKY 2 to develop an instrumented engine cradle for the turboprop demonstrator ground test with SAFRAN Helicopters Engines - 27/04/2018
LUG2 project at NOVEM 2018 - 06/04/2018
Come and meet VibraTec at TRA 2018 - 13/02/2018
MicrodB will be at the 7th Berlin Beamforming conference – BeBeC - 18/09/2017
Why wait to schedule your 2018 training programs ? - 18/07/2017
VibraTec’s training programs referenced by DataDock - 27/10/2016
VibraTec joins the CleanSky program with CANOBLE for interior cabin noise, the sky’s the limit !
Utilising a large array of numerical and analytical tools, VibraTec is able to supply complete design assistance to validate the development of our clients systems.
From the component scale up to the complete assembly system, design assistance includes:
- System design review and choice of architecture,
- Quantitative modeling methods to define the components of each system and their assembly,
- Qualitative analysis with level prediction to assess results against specifications
- Experimental database for realistic input and output data for predictive simulations,
- Optimization process.
VibraTec provides expertise in structural dynamic analysis, linear or non-linear approaches, multi-body and motion analysis, and multi-physics approaches (fluid-structure interaction, electromagnetics, thermal effects, etc.).
Our objective is to deliver a complete architecture with sketches and technical drawings, validated using measurements and adapted to your specifications.
From the system design review up to the critical design review
|
Technicians - we are recruiting ! |