AERONAUTIC AND SPACE
- 12/01/2021
VibraTec proud to organize 1st LIVE-I public event in 2021 - 08/01/2021
VibraTec – designing pragmatic, innovative solutions - 18/12/2020
FIV Webinar: all about Flow-Induced Vibration in piping - 24/11/2020
Registration for our 2021 training programs is open! - 19/11/2020
VibraTec webinar: Acoustic-Induced Vibration - 10/11/2020
ATCx Automobile – November 19th 2020 : Acoustics of electric traction drives: from multiphysical simulation to multicriteria optimization - 04/11/2020
“Business as usual” during lockdown - 08/06/2020
VibraTec offers a technical course in the form of 5 webinars on electric motor + gearbox sub-assemblies (E-powertrain, electric actuators, gear drives, etc) (given in French with English presentations). - 26/05/2020
Resuming in-place operations - 15/04/2020
FATIGUE is an important criterion in your activities, but this subject raises questions? - 01/04/2020
Optimizing E-Powertrain acoustic treatment - 17/03/2020
VibraTec – working from home - 18/02/2020
Clean Sky’s CANOBLE – New architecture, new cockpit… new noise experience - 13/02/2020
Gain computation time with VibraTec’s digital planetary gear model - 06/02/2020
E-powertrain training program – increasing understanding of electric vehicles - 29/01/2020
Trainee satisfaction in 2019 - 21/11/2019
Why wait to schedule your 2020 training programs? - 14/11/2019
Extend asset service life thanks to VibraTec’s expertise in fatigue analysis and approach to evaluate remaining life - 07/11/2019
Quality control is of utmost importance to industrialists - 11/10/2019
Converting data into information to improve structural diagnosis - 11/10/2019
Optimization of E-Powertrain acoustic treatment - 11/10/2019
E-powertrain design to reach performance and NVH targets - 05/09/2019
Experimental validation of numeric planetary gear set behavior - 25/06/2019
Bearing and gear fault detection using Machine Learning - 09/05/2019
25th AIAA/CEAS Aeroacoustics Conference, 20-23 May 2019, Delft, Netherlands - 19/03/2019
There are no passengers on spaceship earth. - 24/09/2018
Hybrid aero/vibro-acoustics modeling to deal with turbulent boundary layer noise & vibration - 11/09/2018
CM 2018 in Delft, Netherlands: Rail joint dynamic forces computations, including rail plasticity - 23/08/2018
Dealing with gear noise of real industrial systems: an overview of the difficulties and the achievements - 15/06/2018
Bayesian focalisation applied to wind tunnels – AIAA/CEAS conference Atlanta - 02/05/2018
Vibratec awarded by the CLEANSKY 2 to develop an instrumented engine cradle for the turboprop demonstrator ground test with SAFRAN Helicopters Engines - 27/04/2018
LUG2 project at NOVEM 2018 - 06/04/2018
Come and meet VibraTec at TRA 2018 - 13/02/2018
MicrodB will be at the 7th Berlin Beamforming conference – BeBeC - 18/09/2017
Why wait to schedule your 2018 training programs ? - 18/07/2017
VibraTec’s training programs referenced by DataDock - 27/10/2016
VibraTec joins the CleanSky program with CANOBLE for interior cabin noise, the sky’s the limit !
Please fill out the following form; we will get back to you as soon as possible. Complete contact info on our “Sites” page.
|
VibraTec has been approved for French Innovation Tax Credit for 2021. This recognizes our ability to carry out innovative design work for clients. |